Silver Lake Fabrication offers clamp-on snow plows for bucket loaders with a built-in float feature. If you're unfamiliar with this term, "float" is a setting that allows your loader's bucket or loader arms to pivot to the ground with just the force of gravity (no hydraulic down-force required). Our plows are designed with a easy to use five position manual angle adjustment (-25°, -12.5°, 0°, 12.5°, 25°) and are available in 6', 7', and 8' lengths. If you are looking for a different length, we are happy to accomodate that as well. Our plows have an overall height of approximately 16" and come equipped with reversible cutting edges. The table below shows prices for the lengths we typically manufacture.
COMMON SIZES AND PRICING
As front end loader buckets are all differt, we custom fabricate every clamp-on plow. This ensures proper fitment, allowing us to keep the plow as close to your bucket as possible at full angle. This also allows us to ensure that the bracket portion of the assembly does not move around or damage your bucket when installed and in use. In order for us to fabricate your plow, there are a few dimensions we require from your bucket. Please click on the diagram below to see a full diagram pointing out the dimensions we require.
Oftentimes, medium and full size loaders have reinforcement plates welded to the bottom of their buckets. If your bucket has reinforcement plates that extend to the cutting edge, we require that dimension "B" in the diagram above be measured at the center of the reinforcing plate, directly behind the cutting edge. If the reinforcement plate does not extend to the cutting edge, please provide us with the thickness of the plate itself. Please click on the diagrams below for further explaination of this. We will also require a measurement of the width of the reinforcing plates, as well as the distance separating them.
If you would like to place an order, you can either give us a call at 603-630-5658 or click on the button below to purchase and pay for your snow plow right now. Due to the size and weight of our clamp-on snow plows, you will have to contact us for a shipping quote. As always, if you are looking for a size we do not have listed, we will be happy to fabricate what you need.
6' length plow
$1500
7' length plow
$1700
8' length plow
$2000
